Your next renovation starts here
TAKE ON
BRICK &
BLOCK.
12" Carbide Masonry
Reciprocating Saw Blade
Give your compatible reciprocating saw a blade designed for brick and block cutting. A long profile and coarse carbide teeth bring masonry work into reach.
The right blade for the material
A masonry blade.
A practical addition to your kit.
From trimming a hollow block to shaping brick for a renovation, match your blade to the task. This carbide-toothed design is intended for masonry applications rather than everyday metal cutting.
Purpose-built cutting teeth
Carbide teeth on an alloy-steel body are designed for abrasive brick and block materials. The coarse 2 TPI pattern provides widely spaced teeth for masonry cutting.
- Carbide cutting edge for masonry applications
- Coarse tooth layout with 2 teeth per inch
- Long blade profile for reach across the workpiece
Match the job
Choose a blade intended for brick and block when preparing your next masonry project.
Work with a long profile
The nominal 12-inch blade provides reach. Usable cutting depth depends on your saw, its stroke and the workpiece.
Use your compatible saw
Check the shank, clamp requirements and permitted blade size before fitting.
Brickwork • Blockwork • Renovation
Made for the materials
on your workbench.
Choose the right cutting task
The supplied product images show use with red brick, hollow cement brick and lightweight or porous concrete block.
- Red brick and brick masonry
- Hollow cement blocks
- Aerated and porous concrete blocks
A closer look
Long profile.
Coarse teeth.
Clear purpose.
A dedicated option for masonry cutting in your reciprocating saw blade collection. Check the workpiece thickness, clamp fit and blade clearance before every cut.
Prepare • Fit • Cut
Set up for the task.
- Check the material and fitConfirm that the workpiece is suitable, free of embedded metal, and within your tool's stated capacity.
- Disconnect power and fit the bladeRemove the battery or unplug the saw, then install and lock the blade according to the saw manufacturer's instructions.
- Secure the workpieceSupport the material, check clearance behind the cut, and use appropriate eye, hearing and respiratory protection.
- Follow your saw's instructionsUse the recommended settings and dust controls for the task. Let the tool cut without excessive pressure.
Know your blade
Product specifications
| Product | Carbide masonry reciprocating saw blade |
|---|---|
| Nominal length | 12 inches (approximately 30 cm) |
| Tooth pitch | 2 TPI (teeth per inch) |
| Construction | Alloy-steel body with carbide cutting teeth |
| Primary applications | Brick, hollow cement block, aerated / porous concrete block |
| Tool type | Compatible reciprocating saw; verify clamp and shank fit before purchase |
| Power tool | Not included; blade listing only |
Before you choose
A few useful answers.
What materials is it intended for?
Its main applications are brick, hollow cement block and lightweight or porous concrete block. Check your material and the tool manufacturer's guidance before use.
Will it fit every reciprocating saw?
Compatibility is not guaranteed for every model. Compare the blade shank with your saw's clamp and confirm that your tool accepts the blade's length and intended application.
Can it cut reinforced concrete or metal?
Do not choose this blade for steel reinforcement, nails or other embedded metal. It is also not intended for stone or dense, hard-aggregate concrete.
Does 12 inches mean a 12-inch cutting depth?
No. The nominal length describes the blade, not an approved cutting depth. The usable depth depends on your saw's stroke, shoe position, workpiece thickness and clearance.
Is the saw included?
No. This listing is for the blade. Saws, gloves, blocks and other accessories shown in the images illustrate use and are not included.
What precautions should I take?
Follow your power tool's instructions. Disconnect power before fitting a blade, secure the workpiece, and use suitable protection and dust controls. Masonry cutting produces dust; avoid inhaling it.
READY FOR YOUR
NEXT BRICK PROJECT?
Check your material and saw compatibility, then choose the 12" carbide masonry blade for your next brick or block cutting task.
